- Inicio/
- greenteQ /
- Herrajes para puertas /
- Juegos de marcos estrechos y piezas sueltas /
- Herrajes para marcos estrechos /
- greenteQ DG58.S216.ZA.AL.SSWK. narrow frame interchangeable set PZ 92
greenteQ DG58.S216.ZA.AL.SSWK. narrow frame interchangeable set PZ 92greenteQ DG58.S216.ZA.AL.SSWK. narrow frame interchangeable set PZ 92
The greenteQ DG 58.S216.ZA.AL.SSWK PZ 92 narrow-frame mortise set is made of aluminum and has a plate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out. The greenteQ DG 58.S216.ZA.AL.SSWK PZ 92 narrow frame mortice set with this spring-loaded cylinder cover provides sufficient pulling protection for a profile cylinder installed in the lock. The lever handle on the inside backplate is fixed/rotatable and has a hold-open spring. The offset knob, which is fixed on the outer backplate, can be remounted.
The greenteQ DG 58.S216.ZA.AL.SSWK PZ 92 narrow frame mortice set is prepared for 8 mm square spindle. The outer plate has 10 mm support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.
Technical data:
- Bearing: fixed / rotatable with retaining spring
- Square pin: for 8 mm
- Support cam: 10 mm
- Plate dimensions: 35 x 245 mm
- Drill hole spacing: 216 mm
- Edge height: 10.5 mm
- Distance: 92 mm PZ
- Cylinder protrusion: 5 - 10 mm
- °Diseño:
- DG58
- °Forma de la placa:
- -
- °Forma de la roseta:
- -
- °Tipo:
- -
- Acodado:
- -
- Altura de la placa:
- - mm
- Ancho de la placa:
- - mm
- Cojinete fijo/móvil:
- ✓
- Cuadradillo:
- for 8 mm
- Cubierta del cilindro:
- ✓
- Denominación del color:
- PVD chrome polished
- DIN 18273: Puerta cortafuego y cortahumo:
- -
- DIN EN 179: Homologación de salida de emergencia:
- -
- Dirección:
- DIN left/right
- Distancia:
- 92 mm
- EN 1906 1: Categoría de uso/aplicación:
- -
- EN 1906 2: Durabilidad:
- -
- EN 1906 3: Masa de la puerta:
- -
- EN 1906 4: Resistencia al fuego:
- -
- EN 1906 5: Seguridad:
- -
- EN 1906 6: Resistencia a la corrosión:
- -
- EN 1906 7: Seguridad de bienes:
- -
- EN 1906 8: Tipo de funcionamiento:
- -
- Fijación:
- -
- Forma del pomo:
- ovoid
- Grosor:
- - mm
- Grosor de la puerta:
- - mm
- Material:
- Aluminium
- Material de la manilla:
- -
- Order Unit:
- GRT
- Orificio llave:
- Profile cylinders
- Perno de apoyo:
- -
- Pomo acodado:
- ✓
- Pomo giratorio:
- -
- Retención del muelle:
- yes
- Saliente del cilindro:
- - mm