set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92 fotografie a produsului BIGPIC L
set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92 fotografie a produsului BIGSKZ L
set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92 fotografie a produsului BIGPIC L
set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92 fotografie a produsului BIGSKZ L

set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92

ID-ul produsului:2172708207
GRT
Unitate de ambalare: 1
Unitatea de vânzare: GRT

The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 is made of non-rusting stainless steel and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The lever is mounted on the inner plate in such a way that it is stationary/rotatable and has a holding spring. The angled button fixed on the outer plate is mountable. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.

 

Technical data:

 

Mounting:   Stationary / rotatable with holding spring
Square spindle:          8 mm
Plate ddimensions: 35 x 245 mm
Edge height:  10.5 mm
Distance:    92 mm PZ
Cylinder protrusion: 5 - 10 mm

 

  

°Design:
DG58
arc de sustinere:
da
butonul ac?ionat:
butonul rotativ:
-
capacul cilindrului:
desemnarea culorii:
Oțel inoxidabil fin mat
Direc?ie:
DIN stânga/dreapta
distanta (distanta):
92 mm
forma nasturii:
ovoid
gaura cheii:
cilindru de profil
mâner cu manivel?:
-
material:
oţel inoxidabil
Order Unit:
GRT
p?trat:
pentru 8 mm
Rulment fix/rotativ: