set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWB. PZ 92set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWB. PZ 92

The greenteQ lever handle set DG 58.S216.ZA.ER.SSWB PZ 92 is made of non-rusting stainless steel and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWB PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The lever is mounted on the inner plate in such a way that it is stationary/rotatable and has a holding spring. The angled bow-type handle fixed on the outer plate is mountable. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWB PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.

Technical data: