- Acasă/
- greenteQ /
- Feronerie pentru uși /
- Seturi de cadre înguste și piese individuale /
- Seturi cu cadru îngust /
- set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92
set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92set de schimb de garnitura îngustă greenteQ DG58.S216.ZA.ER.SSWK. PZ 92
The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 is made of non-rusting stainless steel and has a plate width of 35 mm. The handle is prepared for a profile cylinder, with a spacing of 92 mm. The outer plate has a cylinder cover for a protruding cylinder length of 5–10 mm. The cylinder cover is a special protection device and prevents the lock cylinder from being drilled open. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 with this spring-mounted cylinder cover offers sufficient extraction protection for a profile cylinder built into the lock. The lever is mounted on the inner plate in such a way that it is stationary/rotatable and has a holding spring. The angled button fixed on the outer plate is mountable. The greenteQ lever handle set DG 58.S216.ZA.ER.SSWK PZ 92 is preconfigured for an 8 mm square spindle. The outer plate has supporting cams and is fixed in place by means of a concealed screw connection, for which a separate accessories set (3 x M6 screws, 1 x 8 mm square spindle) is required.
Technical data:
| Mounting: | Stationary / rotatable with holding spring |
| Square spindle: | 8 mm |
| Plate ddimensions: | 35 x 245 mm |
| Edge height: | 10.5 mm |
| Distance: | 92 mm PZ |
| Cylinder protrusion: | 5 - 10 mm |
- °Design:
- DG58
- arc de sustinere:
- da
- butonul ac?ionat:
- ✓
- butonul rotativ:
- -
- capacul cilindrului:
- ✓
- desemnarea culorii:
- Oțel inoxidabil fin mat
- Direc?ie:
- DIN stânga/dreapta
- distanta (distanta):
- 92 mm
- forma nasturii:
- ovoid
- gaura cheii:
- cilindru de profil
- mâner cu manivel?:
- -
- material:
- oţel inoxidabil
- Order Unit:
- GRT
- p?trat:
- pentru 8 mm
- Rulment fix/rotativ:
- ✓