greenteQ narrow frame set DG58.S216.ZA.AL.SSN PZ 92 with low lever handlegreenteQ narrow frame set DG58.S216.ZA.AL.SSN PZ 92 with low lever handle

The greenteQ narrow frame set DG 58.S216.ZA.AL.SSN PZ 92 is made of aluminum and has a plate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out. The greenteQ narrow frame set DG 58.S216.ZA.AL.SSN PZ 92 with this spring-loaded cylinder cover provides sufficient pulling protection for a profile cylinder installed in the lock. The lever handle on the inside escutcheon is fixed/rotatable and has a hold-open spring. The lever handle on the outside plate is low.

The greenteQ narrow frame set DG 58.S216.ZA.AL.SSN PZ 92 is prepared for an 8 mm square spindle. The outer plate has 10 mm support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.

Technical data:

• Bearing: fixed / rotatable with retaining spring
• Square pin: for 8 mm
• Support cam: 10 mm
• Plate dimensions: 35 x 245 mm
• Drill hole spacing: 216 mm
• Edge height: 10.5 mm
• Distance: 92 mm PZ
• Cylinder protrusion: 5 - 10 mm