greenteQ DG58.S216.ZA.AL.SSWB PZ 92 narrow-frame rebate setgreenteQ DG58.S216.ZA.AL.SSWB PZ 92 narrow-frame rebate set

The greenteQ DG 58.S216.ZA.AL.SSWB PZ 92 narrow-frame mortise set is made of aluminum and has a plate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out. The greenteQ DG 58.S216.ZA.AL.SSWB PZ 92 narrow frame mortice set with this spring-loaded cylinder cover provides sufficient pulling protection for a profile cylinder installed in the lock. The lever handle on the inside plate is fixed/rotatable and has a hold-open spring. The offset bow handle, which is fixed on the outer backplate, can be remounted.

The greenteQ DG 58.S216.ZA.AL.SSWB PZ 92 narrow frame spindle set is prepared for 8 mm square spindle. The outer plate has 10 mm support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.

Technical data:

• Bearing: fixed / rotatable with retaining spring
• Square pin: for 8 mm
• Support cam: 10 mm
• Plate dimensions: 35 x 245 mm
• Drill hole spacing: 216 mm
• Edge height: 10.5 mm
• Distance: 92 mm PZ
• Cylinder protrusion: 5 - 10 mm