greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92 product photo BIGPIC L
greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92 product photo BIGSKZ L
greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92 product photo BIGPIC L
greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92 product photo BIGSKZ L

greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92

Product ID:2172708198
GRT
Packaging unit: 1
Sales unit: GRT

The greenteQ narrow frame set DG 58.S216.ZA.ER.SS PZ 92 is made of stainless steel and has a plate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out.

The greenteQ narrow frame set DG 58.S216.ZA.ER.SS. PZ 92 with this spring-loaded cylinder cover offers sufficient pulling protection for a profile cylinder installed in the lock. The lever handles are fixed/rotatable and have a hold-open spring.

The greenteQ narrow frame set DG 58.S216.ZA.ER.SS PZ 92 is prepared for 8 mm square spindle, the outer plate has support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.

Technical data:

  • Bearing: fixed / rotatable with retaining spring
  • Square pin: for 8 mm
  • Plate dimensions: 35 x 245 mm
  • Drill hole spacing: 216 mm
  • Edge height: 10.5 mm
  • Distance: 92 mm PZ
  • Cylinder projection: 5 - 10 mm

°Design:
DG58
Colour designation:
Stainless steel fine matt
Cranked lever handle:
-
direction:
DIN left/right
Distance (spacing):
92 mm
Fixed/rotatable bearing:
Hold-open spring:
yes
Keyhole:
Profile cylinders
material:
Stainless steel
Order Unit:
GRT
Square:
for 8 mm
Type:
Pushbutton/handle
with cylinder cover: