greenteQ profile half cylinder SX 8-F locking no. 5greenteQ profile half cylinder SX 8-F locking no. 5

The greenteQ SX 8-F profile half cylinders are made of matt nickel-plated brass and have a 6-pin standard profile. They are tested in accordance with EN 1303:2005/AC:2008, have an 8-point adjustable locking cam and are equipped with anti-drilling and anti-pulling protection as well as picking resistance using mushroom head pins. The basic length of the greenteQ profile half cylinder SX 8-F is 30 mm; the available extensions increase by 5 mm on one side. The cylinders 1 piece in a packaging unit are always supplied with 3 keys.
The greenteQ profile half cylinders SX 8-F are keyed differently (each individual cylinder is supplied with a different key. The 3 keys supplied with each cylinder therefore do not match any other cylinder) or keyed alike (all cylinders with the same key can be opened and closed with the same key). If required, key blanks for different locking cylinders or multiple keys for keyed alike cylinders are available separately.

Instructions for use of the 8-way adjustable cam:

New functionality of the greenteQ profile half cylinder SX 8-F: The locking cam can be adjusted 8 times at angles of 45° to adapt the cylinder to different installation situations (lockable window handles, key switches or similar).

It's as simple as this:
Press in the push bolt on the back of the cylinder with a pointed object (key, faceplate screw, etc.); turn the lock bit to the desired position; release the push bolt; the push bolt engages automatically.

Technical data:

• Material of the profile cylinder: brass
• Surface: matt nickel-plated
• Number of pins per locking side: 6
• Hazard function: no
• Certified to: EN 1303:2005/AC:2008
• Locking type: 8-way adjustable
• Number of keys per cylinder: 3
• Forend screw: 1 x M5 x 50 mm and 1 x M5 x 80 mm