- Home/
- greenteQ /
- Door fittings /
- Handle sets and individual parts /
- Door handle sets /
- greenteQ Interchangeable front door set DG 48.S216.ZA.ER.NSWK PZ 92
greenteQ Interchangeable front door set DG 48.S216.ZA.ER.NSWK PZ 92greenteQ Interchangeable front door set DG 48.S216.ZA.ER.NSWK PZ 92
greenteQ front door extension set with backplate width 48 mm for front and side entrance doors.
The greenteQ DG 48.S216.ZA.ER.NSWK PZ 92 front door set made of stainless steel has a backplate width of 48 mm and is PZ-perforated. Cylinder cover for a protruding cylinder length of 8 - 11 mm as special protection against drilling. The lever handle on the inside backplate is fixed/rotatable and has a hold-open spring. The offset knob, which is fixed on the outer plate, can be remounted. The greenteQ DG 48.S216.ZA.ER.NSWK PZ 92 front door set is prepared for 8 mm square spindle and 92 mm distance and has 10 mm support cams. Fastening is by means of concealed screws, for which a separate accessory set (3 x M6, 1 x square spindle 8/10 mm) is required.
Technical data
- Material: Stainless steel
- Bearing: fixed/rotatable with retaining spring
- Square pin: for 8 mm
- Support cam: 10 mm
- Plate dimensions: 48 x 245 mm
- Drill hole spacing: 216 mm
- Edge height: 12 mm
- Distance: 92 mm PZ
- Packaging unit: 1 set (without accessory set)
- °Design:
- DG48
- Colour designation:
- Stainless steel fine matt
- Cranked lever handle:
- -
- DIN 18273:
- no
- DIN EN 179:
- no
- direction:
- DIN left/right
- Distance (spacing):
- 92 mm
- Fixed/rotatable bearing:
- ✓
- Handle Material:
- Stainless steel
- Hold-open spring:
- yes
- Keyhole:
- Profile cylinders
- Knob cranked:
- ✓
- Knob rotatable:
- -
- Knob Shape:
- Plate, round
- material:
- Stainless steel
- Order Unit:
- GRT
- Sign shape:
- Long shield, round
- Square:
- for 8 mm
- with cylinder cover:
- ✓