- Home/
- greenteQ /
- Door fittings /
- Narrow frame sets and individual parts /
- Narrow frame half sets /
- greenteQ narrow frame half set DG58.ZA.AL.SS.AU PZ 92
greenteQ narrow frame half set DG58.ZA.AL.SS.AU PZ 92greenteQ narrow frame half set DG58.ZA.AL.SS.AU PZ 92
The greenteQ narrow frame half set DG 58.ZA.AL.SS.AU PZ 92 is made of aluminum with cylinder cover for profile cylinders, as a half set for outside with a plate width of 35 mm. The greenteQ narrow frame half set DG 58.ZA.AL.SS.AU PZ 92 is PZ-perforated with a distance of 92 mm. The cylinder cover is for a protruding cylinder length of 5 - 10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out.
The greenteQ narrow frame half set DG 58.ZA.AL.SS.AU PZ 92 with this spring-loaded cylinder cover provides sufficient pulling protection for a profile cylinder installed in the lock.
The lever handle is fixed/rotatable and has a hold-up spring. The greenteQ narrow frame half set DG 58.ZA.AL.SS.AU PZ 92 is prepared for 8 mm square spindle and has 10 mm support cams. Fastening is by means of concealed screws.
Technical data:
- Bearing: fixed / rotatable with retaining spring
- Square spindle: for 8 mm
- Support cam: 10 mm
- Plate dimensions: 35 x 245 mm
- Drill hole spacing: 210 mm
- Edge height: 10.5 mm
- Distance: 92 mm PZ
- Cylinder protrusion: 5 - 10 mm
- °Design:
- DG58
- Colour designation:
- RAL 8019 brown coated
- Cranked lever handle:
- ✓
- Cylinder projection:
- 5 - 10 mm
- direction:
- DIN left/right
- Distance (spacing):
- 92 mm
- Escutcheon/rosette Outer thickness:
- 10.5 mm
- Fixed/rotatable bearing:
- ✓
- Handle Material:
- Aluminium
- Height of plate:
- 245 mm
- Hold-open spring:
- yes
- Keyhole:
- Profile cylinders
- material:
- Aluminium
- Order Unit:
- GRT
- Square:
- for 8 mm
- Support cam:
- ✓
- Width of plate:
- 35 mm
- with cylinder cover:
- ✓