greenteQ Electronic shutter motor ASgreenteQ Electronic shutter motor AS

Roller shutter motors for easy and simple motorization of roller shutters and sun protection systems.

The electronic greenteQ tubular motor for roller shutter elements with a 60 mm shaft is equipped with a modified adapter. New gear outputs provide better power transmission and higher speeds compared to the previous model.

The clever drive with a fully automatic Plug&Play mode. If the roller shutter encounters an obstacle when moving down, the motor registers this resistance using the fixed shaft connectors and reacts with a STOP. The obstacle is released and protection of the roller shutter, property and people is ensured. The motor also switches off automatically if the roller shutter curtain gets stuck in the guide rails during an up or down command due to frost, thus preventing damage to the roller shutter.

Shaft clip connectors are essential when installing this Plug&Play motor to ensure full functionality. Tested and certified by the VDE Institute.

Technical data:

• Connection: 230 V
• Cable length in m: 2.5
• Running time: 4 minutes
• Limit switch range: 3 minutes
• Protection class: IP44
• Torque: 40 Nm
• Pulling power: 74 kg
• max. tensile load PVC: 16.8 m²
• max. tensile load aluminum: 12.1 m²
• Current consumption: 1.04 A
• Power: W
• Tube Ø (A): 45 mm
• Head Ø (B): 50 mm
• Head width (C): 15.85 mm
• Length (D): mm

Scope of delivery:

• Roller shutter motor
• Instruction manual
• pre-assembled adapter set 60 mm
• Connection cable 2.5 m