- Home/
- greenteQ /
- Door fittings /
- Narrow frame sets and individual parts /
- Narrow frame sets /
- greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92
greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92greenteQ narrow frame set DG58.S216.ZA.ER.SS. PZ 92
The greenteQ narrow frame set DG 58.S216.ZA.ER.SS PZ 92 is made of stainless steel and has a plate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out.
The greenteQ narrow frame set DG 58.S216.ZA.ER.SS. PZ 92 with this spring-loaded cylinder cover offers sufficient pulling protection for a profile cylinder installed in the lock. The lever handles are fixed/rotatable and have a hold-open spring.
The greenteQ narrow frame set DG 58.S216.ZA.ER.SS PZ 92 is prepared for 8 mm square spindle, the outer plate has support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.
Technical data:
- Bearing: fixed / rotatable with retaining spring
- Square pin: for 8 mm
- Plate dimensions: 35 x 245 mm
- Drill hole spacing: 216 mm
- Edge height: 10.5 mm
- Distance: 92 mm PZ
- Cylinder projection: 5 - 10 mm
- °Design:
- DG58
- Colour designation:
- Stainless steel fine matt
- Cranked lever handle:
- -
- direction:
- DIN left/right
- Distance (spacing):
- 92 mm
- Fixed/rotatable bearing:
- ✓
- Hold-open spring:
- yes
- Keyhole:
- Profile cylinders
- material:
- Stainless steel
- Order Unit:
- GRT
- Square:
- for 8 mm
- with cylinder cover:
- ✓