- Home/
- greenteQ /
- Door fittings /
- Narrow frame sets and individual parts /
- Narrow frame sets /
- greenteQ DG58.S216.ZA.ER.SSWB. PZ 92
greenteQ DG58.S216.ZA.ER.SSWB. PZ 92greenteQ DG58.S216.ZA.ER.SSWB. PZ 92
The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame escutcheon set is made of stainless steel and has a backplate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out. The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame mortice set with this spring-loaded cylinder cover offers sufficient pulling protection for a profile cylinder installed in the lock. The lever handle on the inside plate is fixed/rotatable and has a hold-open spring. The offset bow handle, which is fixed on the outer backplate, can be remounted. The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame lever handle set is prepared for 8 mm square spindle. The outer plate has 10 mm support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.
Technical data:
| Bearing: | fixed / rotatable with retaining spring |
| Square pin: | 8 mm |
| Sign dimensions: | 35 x 245 mm |
| Edge height: | 10.5 mm |
| Distance: | 92 mm PZ |
| Cylinder protrusion: | 5 - 10 mm |
- °Design:
- DG58
- Colour designation:
- Stainless steel fine matt
- Cranked lever handle:
- -
- direction:
- DIN left/right
- Distance (spacing):
- 92 mm
- Fixed/rotatable bearing:
- ✓
- Hold-open spring:
- yes
- Keyhole:
- Profile cylinders
- material:
- Stainless steel
- Order Unit:
- GRT
- Square:
- for 8 mm
- with cylinder cover:
- ✓