greenteQ DG58.S216.ZA.ER.SSWB. PZ 92 product photo BIGPIC L
greenteQ DG58.S216.ZA.ER.SSWB. PZ 92 product photo BIGSKZ L
greenteQ DG58.S216.ZA.ER.SSWB. PZ 92 product photo BIGPIC L
greenteQ DG58.S216.ZA.ER.SSWB. PZ 92 product photo BIGSKZ L

greenteQ DG58.S216.ZA.ER.SSWB. PZ 92greenteQ DG58.S216.ZA.ER.SSWB. PZ 92

Product ID:2172708215
GRT
Packaging unit: 1
Sales unit: GRT

The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame escutcheon set is made of stainless steel and has a backplate width of 35 mm. The set is PZ-perforated, with a distance of 92 mm. The outer backplate has a cylinder cover for a protruding cylinder length of 5-10 mm. The cylinder cover is a special protective device and prevents the locking cylinder from being drilled out. The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame mortice set with this spring-loaded cylinder cover offers sufficient pulling protection for a profile cylinder installed in the lock. The lever handle on the inside plate is fixed/rotatable and has a hold-open spring. The offset bow handle, which is fixed on the outer backplate, can be remounted. The greenteQ DG 58.S216.ZA.ER.SSWB PZ 92 narrow frame lever handle set is prepared for 8 mm square spindle. The outer plate has 10 mm support cams, fixing is by means of concealed screws, for which a separate accessory set (3 M6 screws, 1 8 mm square spindle) is required.

Technical data:

Bearing: fixed / rotatable with retaining spring
Square pin: 8 mm
Sign dimensions: 35 x 245 mm
Edge height: 10.5 mm
Distance: 92 mm PZ
Cylinder protrusion: 5 - 10 mm


°Design:
DG58
Colour designation:
Stainless steel fine matt
Cranked lever handle:
-
direction:
DIN left/right
Distance (spacing):
92 mm
Fixed/rotatable bearing:
Hold-open spring:
yes
Keyhole:
Profile cylinders
material:
Stainless steel
Order Unit:
GRT
Square:
for 8 mm
with cylinder cover: